OriginalTimeTest.txt
1 |
# MIF 1.1 |
---|---|
2 |
# |
3 |
# Timing test case, based on muMag Standard Problem #1 |
4 |
# |
5 |
# Run with |
6 |
# |
7 |
# tclsh oommf.tcl batchsolve -interface 0 timetest.mif |
8 |
# |
9 |
####################### MATERIAL PARAMETERS ############################ |
10 |
Ms= 800e3 # Saturation magnetization in A/m. |
11 |
A=13e-12 # Exchange stiffness in J/m. |
12 |
K1= 0.5e3 # Anisotropy constant in J/m^3. |
13 |
Anisotropy Type:uniaxial # One of <uniaxial|cubic>. |
14 |
Anisotropy Dir1: 0 1 0 # Directional cosines wrt to coordinate axes |
15 |
|
16 |
####################### DEMAG SPECIFICATION ############################ |
17 |
Demag Type: ConstMag |
18 |
|
19 |
########################## PART GEOMETRY ############################### |
20 |
Part Width: 1e-6 # Nominal part width in m, adjusted by Cell Size. |
21 |
Part Height: 2e-6 # Nominal part height in m, adjusted by Cell Size. |
22 |
Part Thickness: 20e-9 # Part thickness in m. Required for 2d- and 3d- |
23 |
# Slab models. |
24 |
Cell Size: 20e-9 # Cell size in m. Required. The part width |
25 |
# and height are adjusted to an integral multiple |
26 |
# of the cell size. |
27 |
|
28 |
###################### INITIAL MAGNETIZATION ########################### |
29 |
Init Mag: uniform 90 89 # Inital magnetization routine and parameters; changed by Guru on 22/09/2010 |
30 |
|
31 |
###################### EXPERIMENT PARAMETERS ########################### |
32 |
Field Range: 0.1 0.0 0.0 0.0 0.0 0.0 4 -iteration 200 |
33 |
|
34 |
|
35 |
|
36 |
###################### OUTPUT SPECIFICATIONS ########################### |
37 |
Base Output Filename: timetestfloat # Character string; Required |
38 |
|
39 |
|
40 |
########################## MISCELLANEOUS ############################### |
41 |
Randomizer seed: 1 # Value to seed random number generator with. |
42 |
|