This shows you the differences between two versions of the page.
testlabequipments [2014/09/10 19:28] |
testlabequipments [2014/09/10 19:28] (current) |
||
---|---|---|---|
Line 1: | Line 1: | ||
+ | ====== Test Equipment ====== | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | ===== Agilent Network Analyzer, E5061A ===== | ||
+ | **Specifications** | ||
+ | * 300kHz to 1.5GHz | ||
+ | * 120 dB dynamic range | ||
+ | * 50 or 75 ohm test port impedance | ||
+ | **Accessories** | ||
+ | * Calibration Kit, 85032E | ||
+ | |||
+ | |||
+ | |||
+ | ===== Agilent Logic Analyzer, 1682AD ===== | ||
+ | **Specifications** | ||
+ | * State speed : 200MHz | ||
+ | * Timing speed : 800/400MHz(half/full channel) | ||
+ | * 68 channel standalone logic analyzer with 4 flying probes | ||
+ | * GPIB interface | ||
+ | |||
+ | |||
+ | |||
+ | ===== Agilent Signal Generator, E4422B ===== | ||
+ | * freq: 250kHz - 4GHz | ||
+ | * amp: 35nV - 4V @ 50Ω port | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | ===== Instek Spectrum Analyzer, GSP827 ===== | ||
+ | * Frequency Range: 9 kHz to 2.7 GHz | ||
+ | * Reference clock output: 10MHz | ||
+ | | ||
+ | **Need to check the working status of it** | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | ===== Lecroy Wave Expert 100H ===== | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | ===== Agilent Infiniium Oscilloscope, DSO-80204B ===== | ||
+ | |||
+ | **Specifications** | ||
+ | * 4Ch, 2GHz, 40GSa/s | ||
+ | ** Accessories ** | ||
+ | * 1MΩ impedance adapter, E2697A [Qt.4] | ||
+ | * probes, 100073 [Qt.4] | ||
+ | * Active probe, 1157A - 2.5GHz | ||
+ | * Time correlate with the Infiniium oscilloscope | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | ===== High Impedance Adapter(E2697A) ===== | ||
+ | |||
+ | |||
+ | The E2697A high impedance adapter allows connection of probes that require a high impedance input (e.g., passive probes, current probes) to the Infiniium 54850. The E2697A provides switchable ac/dc coupling, as well as **10:1 and 1:1 attenuation settings**. The E2697A high impedance adapter extends the capability of Agilent Infiniium high-performance oscilloscopes. | ||
+ | |||
+ | Bandwidth: | ||
+ | |||
+ | * 500 MHz with 10073C passive probe | ||
+ | |||
+ | Range: | ||
+ | |||
+ | * Dynamic Range: 1:1 +/- 0.8V; 10:1 +/- 8V | ||
+ | * Dynamic Range with 10073C passive probe: 1:1 +/- 8V; 10:1 +/- 80V | ||
+ | * Maximum Input Voltage: +/- 100V | ||
+ | |||
+ | Input Impedance | ||
+ | |||
+ | * 1MOhm +/-1% (~12 pF) | ||
+ | * Input Coupling: dc, ac (7 Hz) | ||
+ | |||
+ | |||
+ | ===== Instek Digital Storage Oscilloscope, GDS840C ===== | ||
+ | |||
+ | ** Specifications ** | ||
+ | * 2Ch, 250MHz, 100MSa/s | ||
+ | * Oscilloscope probe kit GTP-250A-2 [Qt.10 probes] | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | ===== Instek DC Power Supply ===== | ||
+ | ** Specifications ** | ||
+ | 4 channels - linear power supply | ||
+ | * Ch1 & Ch2 : 0-30V, 3A | ||
+ | * Ch3 : 2.2-5.2V, 1A | ||
+ | * Ch4 : 8-15V, 1A | ||
+ | |||
+ | ===== Function Generator ===== | ||
+ | |||
+ | ===== Digital Multimeter ===== |