Test Equipment

Specifications

• 300kHz to 1.5GHz
• 120 dB dynamic range
• 50 or 75 ohm test port impedance

Accessories

• Calibration Kit, 85032E

Specifications

• State speed : 200MHz
• Timing speed : 800/400MHz(half/full channel)
• 68 channel standalone logic analyzer with 4 flying probes
• GPIB interface

• freq: 250kHz - 4GHz
• amp: 35nV - 4V @ 50Ω port

• Frequency Range: 9 kHz to 2.7 GHz
• Reference clock output: 10MHz

Need to check the working status of it

Specifications

• 4Ch, 2GHz, 40GSa/s

Accessories

• 1MΩ impedance adapter, E2697A [Qt.4]
• probes, 100073 [Qt.4]
• Active probe, 1157A - 2.5GHz
• Time correlate with the Infiniium oscilloscope

The E2697A high impedance adapter allows connection of probes that require a high impedance input (e.g., passive probes, current probes) to the Infiniium 54850. The E2697A provides switchable ac/dc coupling, as well as 10:1 and 1:1 attenuation settings. The E2697A high impedance adapter extends the capability of Agilent Infiniium high-performance oscilloscopes.

Bandwidth:

• 500 MHz with 10073C passive probe

Range:

• Dynamic Range: 1:1 +/- 0.8V; 10:1 +/- 8V
• Dynamic Range with 10073C passive probe: 1:1 +/- 8V; 10:1 +/- 80V
• Maximum Input Voltage: +/- 100V

Input Impedance

• 1MOhm +/-1% (~12 pF)
• Input Coupling: dc, ac (7 Hz)

Specifications

• 2Ch, 250MHz, 100MSa/s
• Oscilloscope probe kit GTP-250A-2 [Qt.10 probes]

Specifications 4 channels - linear power supply

• Ch1 & Ch2 : 0-30V, 3A
• Ch3 : 2.2-5.2V, 1A
• Ch4 : 8-15V, 1A