====== Test Equipment ======








===== Agilent Network Analyzer, E5061A =====
**Specifications**
  * 300kHz to 1.5GHz
  * 120 dB dynamic range
  * 50 or 75 ohm test port impedance
**Accessories**
  * Calibration Kit, 85032E



===== Agilent Logic Analyzer, 1682AD =====
**Specifications**
  * State speed : 200MHz
  * Timing speed : 800/400MHz(half/full channel)
  * 68 channel standalone logic analyzer with 4 flying probes
  * GPIB interface



===== Agilent Signal Generator, E4422B =====
  * freq: 250kHz - 4GHz
  * amp: 35nV - 4V @ 50Ω port








===== Instek Spectrum Analyzer, GSP827 =====
  * Frequency Range: 9 kHz to 2.7 GHz
  * Reference clock output: 10MHz
  
**Need to check the working status of it**






===== Lecroy Wave Expert 100H =====




===== Agilent Infiniium Oscilloscope, DSO-80204B =====

**Specifications**
    * 4Ch, 2GHz, 40GSa/s
** Accessories **
  * 1MΩ impedance adapter, E2697A [Qt.4]
  * probes, 100073 [Qt.4]
  * Active probe, 1157A - 2.5GHz
  * Time correlate with the Infiniium oscilloscope




===== High Impedance Adapter(E2697A) ===== 


The E2697A high impedance adapter allows connection of probes that require a high impedance input (e.g., passive probes, current probes) to the Infiniium 54850. The E2697A provides switchable ac/dc coupling, as well as **10:1 and 1:1 attenuation settings**. The E2697A high impedance adapter extends the capability of Agilent Infiniium high-performance oscilloscopes.

Bandwidth:

    * 500 MHz with 10073C passive probe

Range:

    * Dynamic Range: 1:1 +/- 0.8V; 10:1 +/- 8V
    * Dynamic Range with 10073C passive probe: 1:1 +/- 8V; 10:1 +/- 80V
    * Maximum Input Voltage: +/- 100V

Input Impedance

    * 1MOhm +/-1% (~12 pF)
    * Input Coupling: dc, ac (7 Hz)
 

===== Instek Digital Storage Oscilloscope, GDS840C =====

 ** Specifications **
  * 2Ch, 250MHz, 100MSa/s
  * Oscilloscope probe kit GTP-250A-2 [Qt.10 probes]








===== Instek DC Power Supply =====
** Specifications **
 4 channels - linear power supply
      * Ch1 & Ch2 : 0-30V,  3A
      * Ch3 : 2.2-5.2V, 1A
      * Ch4 : 8-15V, 1A

===== Function Generator =====

===== Digital Multimeter =====